KitchenAid KSBS25FKSS02 Refrigerator Manual

The KitchenAid KSBS25FKSS02 is a side-by-side refrigerator designed to provide ample storage and advanced features for your kitchen. It includes a water and ice dispenser, adjustable shelves, humidity-controlled crispers, and energy-efficient LED lighting. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using the Ice Maker 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Side-by-side design, water and ice dispenser, adjustable shelves, humidity-controlled crispers, energy-efficient LED lighting.

Feature	Description
Water Dispenser	Provides filtered water on demand
Ice Maker	Automatic ice production for convenience
Adjustable Shelves	Customize storage space as needed
Humidity-Controlled Crispers	Keep fruits and vegetables fresh longer
LED Lighting	Bright and energy-efficient interior lighting

Installation

Unpack and inspect contents. Place on a level surface away from heat sources.

Connect water supply: Ensure shut-off valve is accessible.
Level the refrigerator: Adjust legs as necessary.
Plug into AC power: Ensure proper voltage is used.

WARNING! Refrigerator is heavy; lift with care to avoid injury.

First-Time Setup

Power on the refrigerator; follow on-screen prompts if applicable.

Set temperature controls: Adjust to recommended settings.
Activate ice maker: Follow instructions for initial setup.
Allow time for cooling: Wait 24 hours before loading food.

CAUTION! Ensure stable surface; avoid overloading shelves.

Specifications

Type: Side-by-side refrigerator.
Dimensions: 36" W x 69" H x 34" D.
Capacity: 25 cu. ft.
Energy Efficiency: ENERGY STAR® certified.
Ice Maker: Yes, with storage bin.
Water Filtration: Included.
Temperature Control: Electronic controls.

Controls and Settings

Access temperature settings via the control panel located on the front of the refrigerator. Use the buttons to adjust temperature for both the refrigerator and freezer compartments.

Connecting Water Supply

Ensure proper connection to the water supply for the ice maker and water dispenser.

Locate the water supply line and shut-off valve.
Connect the water line to the refrigerator's inlet valve.
Turn on the water supply and check for leaks.

Tip: Use a water filter for better quality water.

Using the Ice Maker

Follow these steps to use the ice maker effectively.

Ensure the ice maker is turned on.
Check the water supply connection.
Wait for ice production to begin (may take several hours).
Dispense ice using the lever or button.

WARNING! Do not overload the ice bin; it may jam.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the exterior with a damp cloth.
Check and replace water filter as needed.
Defrost if necessary; follow manufacturer guidelines.

Regulatory Information

This refrigerator complies with all applicable safety standards and regulations. For support, visit www.kitchenaid.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power supply issue	Check power connection and settings.
Ice maker not producing ice	Water supply issue	Check water line and connections.
Noise from refrigerator	Improper leveling	Adjust legs to level the unit.
Frost buildup	Door seal issue	Inspect and replace door seals if damaged.

Reset: Unplug for 5 minutes to reset the system.

Service: 1-800-422-1230; www.kitchenaid.com