KitchenAid KSRS25QGBT05 Refrigerator Manual

The KitchenAid KSRS25QGBT05 is a side-by-side refrigerator featuring a sleek design, advanced cooling technology, and ample storage space. It includes a water and ice dispenser, adjustable shelves, and energy-efficient performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Side-by-side design, Water and ice dispenser, Adjustable shelves, Crisper drawers, LED lighting.

Installation

Unpack and inspect contents. Place on a level surface away from heat sources.

1. Connect water supply: Ensure proper fittings are used.
2. Level the refrigerator: Adjust the leveling legs as necessary.
3. Plug into AC power: Ensure the outlet is grounded.
4. Allow to cool: Wait 24 hours before placing food inside.

WARNING! Use caution when moving the refrigerator to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on the refrigerator; follow the setup instructions.

1. Set temperature controls: Adjust to recommended settings.
2. Fill the ice maker: Ensure water supply is connected.
3. Organize shelves: Arrange according to your storage needs.
4. Check for leaks: Inspect water connections for any issues.

CAUTION! Ensure the refrigerator is stable and secure during setup.

Specifications

• Model: KitchenAid KSRS25QGBT05
• Type: Side-by-side refrigerator.
• Dimensions: 69.5" H x 35.5" W x 33" D.
• Capacity: 25 cu. ft.
• Energy Consumption: 600 kWh/year.
• Cooling System: Frost-free with multi-air flow.
• Water Filtration: Built-in water filter.
• Warranty: 1-year limited warranty.

Controls and Settings

Access temperature settings via the control panel. Features include temperature adjustment for both refrigerator and freezer compartments.

Control Panel: LED display, temperature settings, filter status indicator.

Additional settings include energy saver mode and vacation mode for efficiency.

Connecting Water Supply

Ensure proper connection to the water supply for the ice maker and water dispenser.

1. Locate the water supply line and shut off the main water supply.
2. Connect the water line to the refrigerator's inlet valve.
3. Turn on the water supply and check for leaks.
4. Flush the water system by dispensing water for several minutes.

Tip: Use a water filter for better tasting water and ice.

Using the Ice Maker

The ice maker automatically produces ice cubes when connected to a water supply.

1. Ensure the ice maker is turned on.
2. Check the water supply connection.
3. Dispense ice using the ice dispenser on the front panel.
4. Monitor the ice bin for fullness and empty as needed.

WARNING! Do not overload the ice bin; it may jam the dispenser.

Maintenance and Care

Regular maintenance ensures optimal performance of your refrigerator.

1. Clean the interior and exterior surfaces with a mild detergent.
2. Check and replace the water filter as recommended.
3. Inspect door seals for wear and replace if necessary.
4. Defrost the freezer if frost buildup exceeds 1/4 inch.

CAUTION! Always unplug the refrigerator before performing maintenance.

Regulatory Information

This refrigerator complies with all applicable safety and performance standards. For more information, visit the KitchenAid website or contact customer service.

Troubleshooting

Reset: Unplug for 5 minutes to reset the refrigerator.

Service: Contact KitchenAid customer service for assistance.